Benjamin Franklin Water Filtration | Serving Greater Fort Worth & Arlington, TX
"*" indicates required fields
A slab leak is a break or pinhole rupture in one of the water lines that runs beneath the concrete foundation of your home, and because those pipes are buried in the slab itself, even a small leak can release a steady stream of water directly into the ground supporting your house. Slab leaks happen on both the pressurized supply side and the drain side of your plumbing system, and the cause is usually some combination of pipe corrosion, soil movement, abrasion against the concrete, or a manufacturing flaw that has finally given out after years of pressure cycling.
The most common warning signs are a warm or damp spot on the floor, a water bill that has climbed for no obvious reason, the sound of running water when every fixture in the house is turned off, a drop in water pressure across the home, and cracks appearing in the drywall or the foundation itself. Any one of these symptoms on its own is worth investigating, and when two or three of them show up together the odds of a slab leak go up considerably.
Our team uses non-invasive electronic leak detection equipment along with pressure testing and acoustic listening tools to pinpoint the exact location of the break before any concrete is touched. The goal of the detection phase is to narrow the leak down to a small area so that the repair work stays focused on one section of the slab rather than turning into a guess that opens up half the floor.
No, and waiting it out is one of the most expensive decisions a homeowner can make in this situation, because the water pressure inside the line continues to push moisture into the soil under the foundation every hour the leak goes unrepaired. Over weeks and months that constant saturation can shift the slab, crack the concrete, warp the flooring above it, and create the kind of structural damage that costs many times more to repair than the original plumbing fix would have.
Most homeowners policies in Texas will cover the cost of accessing the leak and repairing the resulting water damage to your home, though the repair of the pipe itself is often treated as a separate item depending on your specific carrier and policy language. We are happy to provide the detailed documentation and reporting that insurance adjusters typically ask for, which makes the claims process considerably smoother on your end.
That decision depends on the age of the plumbing, the location of the break, and the overall condition of the surrounding pipe, and our plumbers will walk you through both options with the pros and cons of each laid out plainly before any work starts. A spot repair is faster and less expensive when the rest of the line is in good shape, while a reroute is often the smarter long-term choice on older homes where additional leaks are likely to surface within the next few years.
The most useful first step is to shut off the main water supply to your home and then check the water meter to see if the dial is still moving, because a meter that continues to spin with every fixture closed is a strong sign that water is escaping somewhere inside the system. Once you have done that, give our team a call and we will get a licensed plumber out to your home quickly to confirm the source and walk you through the repair options.
If you have any other questions, please contact us directly at: (817) 405-0434
